Portable Gas Measurement Technology
Portable gas detectors
Product overview
Portable gas detectors
Portable gas detectors are used in many fields. For example, single and multiple gas monitors for personal protection against toxic gases and oxygen deficiency, as well as explosive gas mixtures. Portable gas monitors are further used to control indoor air, processes or emissions, such as gas composition from landfill shafts or carbon dioxide concentration in incubators. The fire department, for example, regularly uses portable gas detectors to avert hazards and protect the public and its own employees. A variety of different sensors and sensor technologies are available for these devices. Let us advise you.
SafeAir
Gasmesstechnik | Tragbar
SafeAir® Badges sind ultraleichte und flexibel einsetzbare Passivsammler für die am häufigsten auftretenden Gefahrenstoffe am Arbeitsplatz. Jedes Badge ist sofort einsatzbereit und einfach in der Anwendung – ohne komplizierte Trainingseinheiten.
Mit SafeAir® Badges ist die Schadstoffüberwachung bedienerfreundlich, effektiv und preiswert, da weder eine regelmäßige Kalibrierung noch eine aufwendige Laboranalyse anfällt. Badges sind für zahlreiche Gefahrenstoffe erhältlich, auch für die Detektion von aromatischen Isocyanaten (MDI und TDI).
Leistungsmerkmale
- Tragbares Badge (Passivsammler)
- Erkennung von über 20 Gefahrenstoffen (wie HDI, MDI, TDI, Cl2, ClO2, CO, H2S, HCl, NH3, O3, SO2, PH3 etc.)
- Schnelle Erkennung und optische Anzeige des Gefahrenstoffes
- Hochempfindlich und selektiv
- Farbwechsel innerhalb kurzer Zeit
- Überwachung der AGW (8 Stunden) und KZE-Werte (15 Minuten)
-
Besonderheiten
- Preiswertes Analysesystem
- Keine Kalibrierung erforderlich
- Keine Laboranalytik erforderlich
- Vielseitige Tragemöglichkeiten
- Funktioniert ohne Batterie/Stromversorgung
- Ohne kompliziertes Training einfach in der Anwendung
Tango TX1
Gasmesstechnik | Tragbar
Das tragbare Tango TX1 mit DualSense™ schützt Sie erheblich besser vor gefährlichen Konzentrationen, wie z.B. CO, H2S, NO2, SO2. Gleichzeitig genügt ein monatlicher Funktionstest. Die austauschbare Lithium-Batterie versorgt das Eingas-Warngerät drei Jahre lang zuverlässig mit Strom.
Bei der DualSense™-Technologie wird mit zwei gleichartigen Sensoren ein einzelnes Gas gemessen. Ein spezieller Algorithmus bildet einen Einzelmesswert, der im Display angezeigt wird. Sollte ein Sensor ausfallen, misst der andere Sensor weiter. Dadurch bietet das Tango TX1 besonders zuverlässigen Schutz.
Leistungsmerkmale
- Tragbares Eingas-Warngerät
- Messbare Gase: CO, H2S, NO2, SO2
- Überwachung der Arbeitsplatzgrenzwerte (AGW)
- IP66/IP67
- Zulassungen: ATEX, IECEx, UL und CSA
Besonderheiten
- DualSense™-Technologie
- 3 Jahre Gewährleistung (Gerät, CO und H2S)
- Alarmgeber: optisch mittels hell blinkenden LEDs, lauter akustischer Alarm mit 100 dB und starker Vibrationsalarm
- Durch AlarmAmp™ kann die Lautstärke zusätzlich um 10 dB erhöht werden
- DockingStation DSX kompatibel
- iNet™-fähig
Einsatzbereiche
- Rettungsdienst, Feuerwehr und Brandschutz
- Öl, Gas und Chemische Industrie
- Metallproduktion
- Zellstoff- und Papierherstellung
-
Tango TX2
Gasmesstechnik | Tragbar
Mit dem Tango® TX2 Mitarbeiter schützen, Fehlalarme verringern
und Zeitaufwand für die Verwaltung Ihrer Gaswarngeräte senken.
Das Tango TX2 bietet die höchste Genauigkeit aller Zweigas-
Warngeräte dank individueller Sensoren für verbesserte
Alarmgenauigkeit.
Eine Laufzeit von zwei Jahren und die austauschbare Batterie
vereinfachen die Verwaltung der Überwachung von Gasen,
da keine Ladeinfrastruktur benötigt wird.
Leistungsmerkmale
- Tragbares Mehrgaswarngerät
- Gleichzeitige Messung von bis zu 2 Gasen
- Messbare Gase: CO, CO(H2Low), H2S, NO2, SO2
- Überwachung der AGW, ETW und UEG
- Schutzart: IP68 (staub- und wasserdicht)
- Zulassungen: ATEX, IECEx, CSA und UL
Besonderheiten
- sehr leicht (126g)
- einfach zu bedienen
- Guaranteed for Life™. Garantie
- DockingStation DSX kompatibel
- iNet™-fähig
GasBadge Pro
Gas Measurement | Portable
The portable GasBadge Pro single gas monitor uses interchangeable “smart” sensors, and provides a lifetime of gas hazard protection with a wide range of features. Because of its 10 year warranty, the GasBadge Pro becomes a faithful companion for many years.
Built to highest quality and reliability standards, GasBadge Pro provides a lifetime of gas hazard protection. It communicates directly via an infrared interface to optional accessories like the Datalink, Docking Station and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Its simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.
Characteristics
- Portable Single Gas Monitor
- Available sensors: CO, H2S, O2, NO2, SO2, Cl2, ClO2, PH3, NH3, H2, HCN
- Small size and light weight (only 85 grams)
- Standard STEL and TWA
Features
- Interchangeable “smart” sensors
- 10 year warranty
- Alarms: ultra-bright visual LEDs alarm, loud audible (95 dB) alarm and vibration alarm
- “Go/No Go” display mode
- User adjustable alarm/calibration gas setpoints
- IP66/67 certified – water-resistant case
- 2600 h runtime (typical)
- 1-year datalogging capacity (1-min intervals)
- Event-logging (past 15 alarm events recorded)
- Docking Station compatible
Application areas
- Rescue service, fire department and fire protection
- Oil, gas and chemical industry
- Metal industry
- Pulp and paper production
Ventis MX4
Gas Measurement | Portable
Ventis MX4 multi-gas detector takes your gas detection program to the next level and is ideal for both personal and/or confined space monitoring. Ventis MX4 multi-gas detector is fully customizable to suit your requirements. Ideal for monitoring of confined spaces through the configuration with or without a pump.
The cost effective solution for safety in workplaces: Ventis MX4 offers a versatile range of accessories to choose from. Available with a black or safety orange overmold, and after all the multi-gas detector is iNet™ ready and DS2 compatible.
Characteristics
- Portable Multi-Gas Monitor
- Up to 4 gases monitored simultaneously
- Available sensors: combustible gases, CH4, O2, CO, H2S, NO2, SO2
- Surveillance of occupational exposure limit values (OELs) and lower explosive limit (LEL)
- IP66/IP67
- Certifications: ATEX, IECEx, CSA, UL
Features
- Draw samples from up to 100 feet with an optional, integrated sampling pump
- Backlit Liquid Crystal Display (LCD)
- Rechargeable extended-range lithium-ion battery pack
- Alarms: Ultra-bright LEDs, loud audible alarm (95 dB) and vibrating alarm
- Compatible with DS2 Docking Station
- iNet™ready
Ventis Pro
Gas Measurement | Portable
Be ready for the moment: In your line of work, a day on the job can turn from habit to hazard in a single moment. Be ready for gas hazards and more with the Ventis Pro Series. Upgrade with ease: Don’t buy all new accessories. Most of your Ventis™ MX4 accessories are compatible with the Ventis Pro Series.
Detect up to five gases: Rely on flexible sensor options to detect combustible and toxic gases in a broad range of settings, making the Ventis Pro Series ideal for both personal protection and confined space applications. Keep your instruments in the field, not the shop, thanks to an IP68 rating for dust and water ingress and a rugged overmold that is Guaranteed for Life™.
Characteristics
- Portable Multi-Gas Monitor
- Up to 5 gases monitored simultaneously
- Available sensors: combustible gases/CH4, O2, CO, H2, H2S, HCN, NH3, NO2, SO2, CO2/HC and CO2/CH4
- Surveillance of occupational exposure limit values and lower explosive limit
- Rugged IP68 water and dust rating and Guaranteed for Life™ warranty
- Certifications: ATEX, IECEx, CSA, UL
Features
- Available with or without a pump
- LENS Wireless
- iAssign Technology
- Alarms: Ultra-bright LEDs, loud audible alarm (95 dB) and vibrating alarm
- Compatible with Ventis MX4 accessories
- iNet™and DSX Docking Station ready
Geotech SEM5000
Gas Measurement | Portable
The SEM5000 is able to measure concentrations of methane in the range of 0.5ppm to 100% of volume. This complete range of concentrations is covered by the instrument thanks to three methods of calculation which are operational in real time. The instrument manages and activates automatically the adequate range of concentration.
Characteristics
- Portable methane detector
- Range CH4: is able to detect emissions from 1-10000 ppm or from 0,1% to 100% v/v
- Lightweight and ergonomically designed for hands-free operation
- All-in-one, easy to use solution for surface emissions monitoring, reporting and compliance
Features
- Accurate monitoring system, which ensures that there is no cross-gas interference
- Patented laser technology
- Global positioning system (GPS) and Bluetooth built in, which makes mapping and duplication of selected areas more efficient
- Protection class IP 23
- ATEX certified to be intrinsically safe for use in Class 1, Zone 1 areas
iBrid MX6
Gas Measurement | Portable
Get ready to see hazardous levels of O2, toxic and combustible gas, and VOCs like never before. The portable Multi-Gas Monitor MX6 iBrid is the first gas monitor to feature a full-color graphic LCD display screen. Up to 6 gases monitored simultaneously with the choice of 25 different sensor options!
The MX6 iBrid is more than an intelligent hybrid unit combining different sensor technologies. The display improves safety with clear readings in low-light, bright-light or anywhere in between. Simple and user-friendly: MX6 allows the user to step through the instrument settings and functions with an intuitive menu and the five-way navigation button.
Characteristics
- Portable Multi-Gas Monitor
- Up to 6 gases monitored simultaneously
- Available sensors: combustible gases, CH4, CO, CO2, Cl2, ClO2, H2, H2S, HCN, HCl, NH3, NO, NO2, O2, PH3, SO2, PID, VOCs
- Surveillance of occupational exposure limit values (OELs) and lower explosive limit (LEL)
Features
- Full-color graphic LCD display
- Menu-driven navigation with five-way button
- 25 Sensor options including PID and IR
- Durable, concussion-proof, rubber overmold
- “Plug-and-Play” field-replaceable sensors
- Powerful, 95 dB audible alarm
- Docking Station and iNet compatible
iBrid MX6 PID
Gas Measurement | Portable
Arson or Accident?
The portable iBrid MX6 PID offers highest flexibility to detect hazardous material, fire accelerators and VOCs. It can be used as PID only or in combination with combustible, toxic and oxygen sensors.
In case of an accidential release of hazardous material a disaster is possible. Accurate and intelligent measurements are besides Know-How and routine, the key to fast and precise decisions for Haz-Mat response teams.
Characteristics
- Portable PID
- 6 eV PID Lamp
- Range 0…2000 ppm
- 116 response factors
- 5 favorits
- Data logger
- Full-color graphic LCD, highly visible
- Simple, user friendly, menu-driven navigation
- Upgrade with up to 4 more sensors (electrochemical, catalytic, Infrared)
- Alarm turn-off
- ATEX-Certification II 2G, EEx ia D IIC T4
- Docking Station DS2compatible
Typical Applications
- Confined space entry
- Detection of dangerous goods
- Arson investigation
- Leckage detection
- Hazardous material response monitoring
- Tactical support for fire fighters in protection, risk assesment, determination of fence line, C-contamination control
- Tactical support for police officers at drug lab investigation
-
CUB PID
Gasmesstechnik | Tragbar
Der CUB bietet mit dem Messbereich von 0,1 bis 5000 ppm den größten seiner Klasse. Neben der ppm-Ausführung ist CUB auch in einer ppb- oder TAC-Version zur Benzolüberwachung erhältlich. Weiterhin ist er ATEX-zertifiziert und somit für den Einsatz in potentiell explosiven Umgebungen geeignet.
Leistungsmerkmale
- Tragbarer PID Eingasdetektor
- Detektion von VOC/TAC
- Messbereich: 0,1-5000 ppm
Besonderheiten
- Datenlogger für 30.000 Messwerte
- FENCETEC (patentierte Feuchtekompensation)
- Antikontaminationsdesign
- 16 Stunden Akkustandzeit
- ATEX-Zertifizierung
Einsatzbereiche
- Feuerwehren/Ersthelfer
- Arbeitsschutz
- Mitarbeiter der Chemischen Industrie
- Öl- und Gas-Branche
Tiger PID
Gasmesstechnik | Tragbar
Der revolutionäre PID Gasdetektor Tiger für die Messung flüchtiger organischer Verbindungen (VOC) setzt völlig neue Maßstäbe. Er bietet mit 1 ppb bis 20.000 ppm den derzeit größten Messbereich am Markt. Und misst über 450 Gase, die komfortabel über die integrierte Bibliothek aufgerufen werden können.
Der Tiger PID Photoionisations-Detektor verfügt über die patentierte FENCEtec-Technologie. Selbst in extrem feuchter Umgebung garantiert diese schnelle und genaue Messungen. Die Software und Funktionsweise dieses tragbaren Handmessgerätes setzen völlig neue Maßstäbe.
Leistungsmerkmale
- Tragbarer Photoionisations-Detektor
- 10.6 eV PID Krypton Lampe (oder 11.7 eV)
- Messbereich (Standard) 0,1…10000 ppm
- Messbereich (ppb Version) 1 ppb…20000 ppm
- 450 Gase messbar (alle über die integrierte Messgas-Bibliothek abrufbar)
- Datenlogger optional
- Datenübertragung über USB-Schnittstelle
- Graphische Darstellung der Messwerte, Geräteeinstellung und Datenexport über Software
- 2 Alarmwerte frei einstellbar
- Einfache intuitive Bedienung
- Schutzklasse IP65
- ATEX-Zertifizierung, IECEx, UL und CSA
-
Typische Einsatzbereiche
- Überwachung von gesundheitsschädlichen Stoffen in geschlossenen Räumen
- Ermittlung von Gefahrstoffen bei Unfällen
- Detektion von Brandbeschleunigern
- Umweltanalytik
- Leckage-Detektion
- Feuerwehrtaktische Unterstützung für Eigenschutz, Risikoabschätzung, Festlegung der Absperrgrenzen, C-Kontaminations-Kontrolle
- Polizeitaktische Unterstützung bei Umwelteinsätzen und in Drogenlaboren
-
Radius BZ-1 Area Monitor
Gas Measurement | Portable
Get the Message Loud and Clear: When it comes to choosing equipment to protect your worksite from hazardous gases, rely on the Radius™ BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.
Radius just works, no questions asked, so your teams can focus on what’s important and be confident that their area monitors are ready for whatever comes their way. Know What is Happening Without Approaching: Create wireless networks out of the box and receive real-time gas readings from other instruments, thanks to LENS Wireless and its automatic, peer-to-peer mesh network.
Characteristics
- Portable Multi-Gas Monitor
- Detect up to seven gases using 15 sensor options including PID
- Measuring ranges: Combustible gases, O2, CO, CO/H2, CO/H2S, H2, H2S, HCN, NH3, NO2, SO2 und VOC
- Standard are STEL and TWA readings
- IP66
- Certifications: ATEX, IECEx, CSA and UL
Features
- Longest running area monitor with a typical run time of 7 days (168 hours)
- LENS™ Wireless enables communication between area monitors and Ventis™ Pro Series personal monitors
- Customizable alarm action messages
- iNet ® and DSX™ Docking Station ready
- Powerful audible alarm 108 dB @ 1 meter
Typical Applications
- define restricted areas
- securing mobile construction sites
- gas monitoring
MECCOS MGM
Gas Measurement | Portable
The MECCOS MGM Multi-Gas Monitor is a portable gas warning device, featuring the recognition, detection, and registration of hazardous substances. The monitor can be equipped with up to 16 sensors and has a built in alarm to protect your employees. The MECCOS MGM is considered the most versitile gas warning devices available.
Predominantly electrochemical sensors are used in the MECCOS MGM. For alternative principles of measurement the infrared absorption and photoionization are available. Specially developed for detecting toxic gases immediately, therefore the MECCOS MGM is particularly suitable for all fire-fighting operations and runs.
Characteristics
- Mobile multi-gas monitor
- Available gases in basic version:
NO2, NO, O2, O3, H2S, Hydrides (AsH3), F2, Cl2, HF, HCl/HBr, HCN, SO2, NH3, CO, H2, CH4/LEL, CO2, COCl2, VOC (PID) (Customization possible) - Surveillance of occupational exposure limit values (OELs) and acute exposure guideline levels (AEGL)
-
Features
- 4’’ Touch Screen shows values in real-time
- Internal buzzer and LEDs signalize exceeding limit values for each sensor
- Continuous operation (Li-Ion) for approx. 3 hours
- GPS (optional)
-
Application areas
- Especially for fire-fighters
- Emergency response
-
Biogas 5000
Gas Measurement | Portable
Easy to use, calibrate and configure, the BIOGAS 5000 enables you to collect consistent data for improved analysis and accurate reporting, whilst helping to check the digester process is running efficiently. User configurable operation.
The MECCOS Gas Analyser operates with high-grade infrared sensors for monitoring CH4 and CO2. A highly durable electrochemical sensor is used for O2 and H2S. For sensor life expectancy the Gas Analyser unit can enhanced with a multi-level gas sample treatment.
Characteristics
- Portable Biogas Analyser
- Measuring substances: CH4 (0…70Vol%), CO2 (0…60Vol%), O2 (0…25Vol%)
- H2S, CO, NH3 and H2, up to 6 gases monitored
- ATEX- and IECEx-Certified
Features
- IR absorption and long-life sensor for O2
- Powerful internal pump
- Calibration according to ISO 17025
- Datalogging and profiling function
- Protection class IP65
Special accessories
- Enables consistent collection of data for improved analysis and accurate reporting
- ATEX certified temperature probe
- No need for self-certification of anemometer
G100
Gas Measurement | Portable
The portable CO2 analyser G100 specifically designed to monitor carbon dioxide concentrations. The internal pump collects the measuring gas from over 2 meters. With the powerful lithium-ion battery, the G100 runs a complete working day – even with the pump.
The G100 provides the user with a fast, simple to use and accurate piece of laboratory kit. The key benefit of using the G100 is the ability to take simultaneous CO2, O2, relative humidity and temperature readings. User friendly software specifically created for the G100 helps you make sense of your data storage and download.
Characteristics
- Portable CO2 Analyser
- CO2 measurement levels between 0-20%
- Infra-red with reference channel
Features
- Pump 100cc/min typically
- Options for O2
- Large data storage up to 1000 readings
- Built in gas moisture removal
- Li Ion with 10 hours battery life
- Protection class IP 40
Special accessories
- Data storage and download
- Humidity sensor 0-100%Dual temperature probes 0 to 50°C
- MAK
My Datasense H2S1000
Gasmesstechnik | Tragbar
Microtronics hilft Ihnen im Kampf gegen H2S mit einem Komplettpaket aus Hardware, Software und Service. Die Messgeräte wurden an die Bedürfnisse der Kunden angepasst und sorgen dank Wartungskonzept für eine Ressourcen- und Kosteneinsparung.
Die kontinuierliche Datensammlung hilft auch dabei, Schäden frühzeitig zu erkennen, Ausfälle zu vermeiden und Prozesse zu optimieren. Die H2S-Monitoring Lösung ist zusätzlich mit einer Dosiersteuerung kombinierbar. So können entweder event-basiert, also sobald es zu einer Geruchsbildung kommt, oder präventiv Chemikalien zur Minderung der H2S-Konzentration abgegeben werden.
Leistungsmerkmale
Drei Varianten verfügbar:
- Bluetooth Datenübertragung ohne ATEX Zertifizierung
- Bluetooth Datenübertragung mit ATEX Zertifizierung
- 3/4 G Variante ohne ATEX Zertifizierung
- 3/4 G Variante mit ATEX Zertifizierung
Große Sensorauswahl
- H2S:
- 0-200ppm; max. 1.000ppm
- 0-2.000ppm; max. 3.900ppm
- 0-200ppm; max. 500ppm
- 0-50ppm; max. 200ppm
- 0-50ppm; max. 220ppm
- H2O2: 0-100ppm; max. 200ppm
- NH3: 0-50ppm; max. 100ppm
Schutzart: IP 66
Betriebstemperatur: -10°C … +40°C
Relative Feuchte: 15%rH … 90%rH
Druckbereich: atmosphärisch +/- 10%
ATEX Varianten: ATEX Zone 1
Interne Temperatur: -20°C … +50°C
Interne Relative Feuchte: 0 … 100%rH
Batterieladezustand (State of Charge): 0 … 100%
BLE Signalqualität: -50dBm … -110dBm
Interne Temperatur: -20°C … +50°C
Interne Relative Feuchte: 0 … 100%rH
Batterieladezustand (State of Charge): 0 … 100%
Besonderheiten
- Sensortausch direkt an der Messstelle
- Einfache Installation
- Alternative Gas Sensor Typen:
NH3, CO, CL2, C2H4O, H2, HCN, HCL, NO, NO2, O3, SO - Schutz der Daten durch ein umfangreiches
Sicherheitskonzept - Übertragen der Daten über 3G/UMTS
zu weltweit standardisierten Servicetarifen - Laufzeiten von bis zu 36 Monaten dank der Ultra Low Power Technologie
- Vielfältige Einstellungsmöglichkeiten
- GasBuster App
Chameleon
Gas Measurement | Portable
Traditional electronic chemical detection devices require a great deal of training, a large budget and regular maintenance. The Chameleon (chemical detection armband) is much more convenient. Simple to use and low cost, Chameleon is a unique chemical detection device that can be used by every warfighter, police officer and firefighter.
Military, law enforcement, first responders and emergency personnel know — the most effective missions are the safest. And only known dangers can be proactively mitigated. The Chameleon chemical detection armband was designed for these threats.
Characteristics
- Chemical Detection Armband
- Sensors available NH3, Cl2, F2, I2, PH3, B2H6, COCl2, N2H4, HCN, HF, H2S, SO2, NO2, other sensors coming soon
- Sensitivity at PEL concentration:
Color change in <30 minutes - Sensitivity at one-half IDLH concentration: Color change in <5 minutes
- Temperature Range -30° to 50°C (-22°F to 122°F)
Features
- Can be worn on the forearm, upper arm or even leg
- No power, no calibration
- No special training is needed to use
- Immersion Salt/Fresh water: 1 hour
- Cassette shelf Life: 24 months
Chromair
Gas Measurement | Portable
Mit ChromAir® Badges ist Schadstoffüberwachung effektiv und preiswert: Die Langzeitmessung erfolgt zuverlässig über Diffusion und ohne Einsatz einer Pumpe. Es sind weder regelmäßige Kalibrierungen noch aufwendige Laboranalysen erforderlich. Geeignet für personenbezogene und ortsbezogene Messungen über eine festgelegte Zeitspanne.
Leistungsmerkmale
- Tragbares Badge (Passivsammler)
- Erkennung von zahlreichen Gefahrenstoffen (wie CO, Cl2, H2S, NH3, O3, MEK etc.)
- Schnelle Erkennung und optische Anzeige des Gefahrenstoffes durch Farbwechsel
- Hochempfindlich und selektiv
- Farbwechsel innerhalb kurzer Zeit
- Personenbezogene Langzeitmessung zur Überwachung der AGW- (8 Stunden) und KZE-Werte (15 Minuten)
Besonderheiten
- Preiswertes Analysesystem
- Keine Kalibrierung erforderlich
- Keine Laboranalytik erforderlich
- Vielseitige Tragemöglichkeiten
- Funktioniert ohne Batterie/Stromversorgung
- Einfach in der Anwendung – ohne kompliziertes Training
Formaldemeter htV
Gas Measurement | Portable
With further importance being put on air quality in public buildings, the workplace and in homes, the Formaldemeter htV is aimed toward being the most accurate monitor for formaldehyde concentrations whilst still providing quick and simple operation from a hand-held device.
The Formaldemeter htV is an ultra compact, hand held formaldehyde monitor that not only provides a rapid indication of hazardous formaldehyde vapor levels but also measures temperature and relative humidity accurately. Formaldehyde readings can be displayed in under ten seconds, so you can respond to over exposures as they occur and these are automatically corrected for temperature and humidity.
Characteristics
- Formaldehyde monitor
- Range: 0-10 ppm
- Resolution: 0.01 ppm
- Response time: 60 seconds in “high accuracy” and approx. 8 seconds in “lower accuracy” mode
- Sampling method: 10ml snatch-sample of air taken by internal pump
- Sampling frequency: 1-3 minutes
- Displays formaldehyde concentration in both parts per million (ppm) and mg/m³
- Immune to extremes of humidity/temperature
- Simple calibration procedure
- Fast sampling by pressing a single button and quick recovery from normal concentrations
- PC remote control software for data logging
- Manufactured to ISO 9001:2000 quality standards and compliant to CE regulations
Formaldemeter htV-M
Gas Measurement | Portable
With further importance being put on air quality in public buildings, the workplace and in homes, the Formaldemeter htV-M is aimed toward being the most accurate monitor for formaldehyde concentrations whilst still providing quick and simple operation from a hand-held device.
The Formaldemeter htV-M is an ultra compact, hand held formaldehyde monitor that not only provides a rapid indication of hazardous formaldehyde vapor levels but also measures temperature and relative humidity accurately. Formaldehyde readings can be displayed in under ten seconds, so you can respond to over exposures as they occur and these are automatically corrected for temperature and humidity.
Features
- Formaldehyde monitor
- Range: 0-10 ppm
- Resolution: 0.01 ppm
- Response time: 60 seconds in “high accuracy” and approx. 8 seconds in “lower accuracy” mode
- Sampling method: 10ml snatch-sample of air taken by internal pump
- Sampling frequency: 1-3 minutes
- Displays formaldehyde concentration in both parts per million (ppm) and mg/m³
- Immune to extremes of humidity/temperature
- Simple calibration procedure
- Fast sampling by pressing a single button and quick recovery from normal concentrations
- PC remote control software for data logging
- Manufactured to ISO 9001:2000 quality standards and compliant to CE regulations