Stationary gas measurement technology
Stationary gas measuring instruments
Product overview
Stationary gas detectors
Whether it is to monitor indoor air in classrooms or conference rooms for carbon dioxide, workplaces in the semiconductor industry for toxic gases, methane in wastewater treatment plants, biogas plants, engine test benches or chemical production plants , stationary gas detection technology can be found in many industries and areas. The requirements are very different and range from simple CE certification to SIL2 and ATEX certification as well as industry–specific certifications. We present a selection of our stationary measuring devices below. We would be pleased to present further possibilities, especially for sample gas conditioning, to you personally.
Biogas 3000
Gasmesstechnik | Stationär
Easy to use, calibrate and configure, the BIOGAS 3000 enables you to collect consistent data for improved analysis and accurate reporting, whilst helping to check the digester process is running efficiently. BIOGAS 3000 ist für explosionsgefährdete Bereiche geeignet.
The new ATEX certified BIOGAS 3000 builds on field-proven, robust gas analysis technology to offer cost effective online monitoring with local data outputs. Customisable to your specific landfill and anaerobic digestion site requirements. Und bietet eine kostengünstige Online-Überwachung mit lokalen Datenausgängen.
Characteristics
- Fixed biogas analyser for landfill and anaerobic digestion sites
- Measurable substances: CH4, CO2 and O2 as standard
- Optional measurement of H2S, CO and H2
- ATEX- und IECEx-certificate (Zone 2)
- Ability to monitor the gas control process before and after desulphurisation
Features
- Zero operational downtime for servicing
- The modular design enables users to hot-swap for serviceability and onsite maintenance
- Gas alarms and fault notifications
- IP65 rated unit for weather proofing
Optional
- Continuous monitoring option
- Optional Profibus and Profinet communication
- An optional heater is available to extend the operating temperature range to -20°C
SIECO2 traffic light
Gasmesstechnik | Stationär
The SIECO2 traffic light shows you the carbon dioxide concentration in the room air within seconds. You know immediately whether the room should be ventilated or not. Because less CO2 means fewer aerosols and the risk of infection for Corona can be reduced as a result.
To limit the risk of infection (e.g. by SARS-CoV-2 or viruses) in rooms, the air should be changed regularly. The Federal Environment Agency made a recommendation to this effect in 2020. With the CO2 traffic light SIECO2 you know when it is time to ventilate. When the CO2 concentration is within the normal range, the large ball indicator lights up green. If it is exceeded, the color changes to yellow or red.
Characteristics
- CO2-traffic light (stationary CO2 warning device)
- Measuring range: 0-5000 ppm carbon dioxide
- Continuously monitoring of CO2 concentration in indoor air (school, university, daycare center, office, conference hall, meeting or waiting room, etc.)
- Improves ventilation processes
Features
- Infrared sensor (NDIR)
- Simultaneous measurement of humidity, air pressure and temperature
- Visual and audible alarm (can be deactivated)
- Data memory and data recording
- Calculation of average values (timebase adjustable)
- Protection class IP 23
Optional
- Bluetooth
- Android app for visualization of the measured values
- Battery operation (via powerbank)
- Relay output to control ventilation
Meridian
Gasmesstechnik | Stationär
Meridian’s single detector head supports combustible and toxic sensors. Designed for ease of use, Meridian significantly reduces upfront investment and ongoing maintenance costs. With global approvals and SIL2 certification from TÜV-Rheinland, Meridian ensures best in class performance and safety. Global SIL 2 certification by TÜV Rheinland guarantees best-in-class reliability.
Characteristics
- Fixed Gas Transmitter
- Acceptance of up to 3 sensors simultaneously
- Detecting 50+ toxic and combustible gases
- Sensor Types: Electrochemical, IR, Catalytic bead, Metal Oxide Semiconductor sensor
- Intrinsically safe – IP66 protection
- ATEX, CE, IECEx, CSA, MED
- SIL2 and SIL3 (TÃœV certification)
Features
- Rock Solid (high stability) sensors
- Plug-and-Play Design
- Allows field calibration in hazardous locations
- 3 programmable alarms with set/reset
- Relays: 4 Form C
- Communication: 4-20 mA, Modbus
Optional: PROFIBUS, HART, Foundation Fieldbus SIS, wireless HART and ISA100.11a
MECCOS AW40
Gasmesstechnik | Stationär
The Liquid Probe MECCOS AW40 is an efficient, easy to operate detection instrument for direct control of leakages from plants or depots in water. Continuous online-detection provides the significant advantage to indicate peak loads over longer periods.
The MECCOS AW40 in situ measuring probe detects substances in water. Monitoring hydrocarbons, toxic gases or oxygen, according to selected sensor technology and calibration.
Characteristics
- in-situ measurement
- Measurable substances: KW, CKW, FCKW, LHKW, BTX, DOC, VOC, H2S, H2, HCL, O3, CO, CL2, NH3, SO2, NO, NO2 (further compounds on request)
- Control of leakages from plants or depots in water
Features
- Patented VOC measurement
- Group detection or single analysis
- Using different sensor technologies
- Easy installation
Applications
- Waste water
- Surface water
- Drinking water
- Landfill leachate
- Ground water
- Process water
MECCOS EVS IR3
Gasmesstechnik | Stationär
The fixed system MECCOS EVS IR3 is a robust infrared spectrophotometer that provides the continuous gas monitoring of hydrocarbons, solvents and cooling agents. Besonders VOC sind gesundheitsschädigend, einige von ihnen sogar krebserregend, werden aber in vielen Prozessen wie Kühlen und Lackieren eingesetzt.
By using specifically filters and detectors it is possible to customise the MECCOS EVS IR3 for selective detection of several substances such as Styrene, Tetrachloroethene, Trichloroethane, Methanol, Dichloromethane, Cooling agents, VOC or BTX.
Characteristics
- Infrared spectralphotometer
- Detectable:
- All infrared active gases
- Solvents
- Cooling agents
- Hydrocarbons
- Surveillance of OELs, control of production processes
Features
- Selective detection with infrared sensor
- Integration of several sensors
- Selectivity and reproducibility of results
- High reproducibility
- Long-term stability
- Limit values configurable
- Automatic zero correction
Applications
- Alarm device for cooling agents
- Yeast fermentation
- Fabrication of GRP and processing
- Paint finishing systems
- Land reclamation
MECCOS eTR / iTR
Gasmesstechnik | Stationär
iTr transmitters operate with infrared sensors monitoring CO2 and CH4. Dies ist überall dort sinnvoll, wo die menschliche Gesundheit durch Leckagen gefährdet sein könnte (z.B. Arbeitsplätze) oder eine optimale Raumluft angestrebt wird (z.B. Theater). By using electrochemical sensors the eTr transmitters are able to detect toxic gases and oxygen.
For the detection of gas concentrations or leakages one or more iTR/eTR Transmitters are installed directly in the area of interest. On the transmitter front panel all alarms are indicated by LEDs. If the external alarm indication and power supply are needed the WinGas Digital Monitoris available for installation in a central control room.
Characteristics
- Fixed stand-alone gas warning device
- Measurable gases
- Infra-red: CO2, CH4, Hydrocarbons
- Electrochemical: O2, O3, NH3, Cl2, H2S, SO2
- PID: VOC
- Surveillance of occupational exposure limit values (OELs)
Features
- Selective measuring of CO2 and CH4
- Stand-alone operation
- 4 LEDs display alert, warning, ready, failure
- Internal buzzer
- 3 integrated relay contacts for alert, warning, failure
Applications
- Laboratories
- Stockrooms
- Boiler rooms
- Cellar rooms
MECCOS TrGL
Gasmesstechnik | Stationär
Whether its you or your food, refrigeration keeps things cool. Ob Luxusliner oder Frachter – jedes Schiff hat sie an Bord. However, cooling agents are not always self sustained. Meccos TvGL’s unique regulating and monitoring system it is your preemptive solution to cooling agent leaks. This new stationary warning device for gas continuously monitors any refrigeration unit or air conditioner.
Der MECCOS TrGL hat die Zertifizierung durch Germanischer Lloyd (GL). It recognises, localises and immediately warns of the slightest leak. Each MECCOS TrGL unit is dedicated to a specific coolant and operates directly in the danger area. Leaking gas is diffused through a gas-permeable membrane in the sensor system.
Characteristics
- Stationary stand-alone warning device
- Measurable gases: CO2, R134a, R404a, R407, NH3, O2 (Other coolants on request.)
- Arbeitsplatzüberwachung (AGW), Leckageüberwachung nach Kältemittelverordnung DIN EN 378
Features
- Ship licensing and certification through Lloyd’s in Germany (GL) for Environment Category A
- 10-year failure-free continuous operation with 12-monthly calibration intervals keep running costs to a minimum
- 4 frontal LEDs indicate current activity: Ready, Warning, Alert and Fail
- A register displaying measurement data with an external 4…20 mA Analogue-Interface is an option
- Splitterbox (optional)
Applications
- Marine
- Kreuzfahrtschiffe
- Handelsschifffahrt
MECCOS EVM IR2
Gasmesstechnik | Stationär
The MECCOS EVM IR2 is a robust, saltwater tight, shake and quake resistant infrared spectralphotometer specifically designed for the needs on navy ships. On navy ships such as submarine boats, minesweepers and frigates MECCOS EVM IR2 is the core of the alarm system for cooling agents.
To see the red light when refrigerants escape, the indicating device alerts the crew on location and gives alarm simultaneously to the control room. Deshalb ist es seit Jahren festes Besatzungsmitglied auf den Schiffen der Deutschen Marine.
Characteristics
- Stationary refrigeration warning instrument, Infraredsprectrometer with reference detector
- Measurable gases: all infrared-active gases
- Refrigerants R404A, R407C, R125, R134A, R123, R22, R508A, R11
- Other gases: VOC, CO2, SF6, NH3, O2
- Monitoring of occupational exposure limits
Features
- Operates in diffusion or pump mode
- BWB (“Federal Office for Defence Technology and Procurement”) Approved Type Test WTD 71-530-027/2002
Applications
- Leakage detection on board German Navy vessels
SM 343, MJ 332, K 130, F 122, F 123, F 124
Odalog L2
Gasmesstechnik | Stationär
With improved applications the OdaLog L2 has been specifically redesigned to withstand the harsh conditions of the wastewater industry. Die Speicherkapazität des tragbaren Messgeräts umfasst 42.000 Messwerte. The ability to log H2S data for extended periods of time makes the OdaLog L2 your solution to waste water measurement.
The OdaLog L2 purpose is to log levels of H2S for extended periods for later downloading of data in tabular or graphical form to highlight significant variations in H2S levels over time. Starke Abweichungen von H2S-Konzentrationen lassen sich so über längere Zeiträume darstellen. Due to the nature of the environment in which the instrument has to operate, it has been designed to be splash resistant, robust and small.
Characteristics
- Portable gas monitor and data logger
- Measurable gases: H2S, CO, Cl2, HCN, NO, NO2, SO2
- Long term recording of gas concentrations
Features
- Long battery life, up to 12 months
- Uses Infa Red communication for faster downloading
- Large clear LCD display
- Memory capacity up to 6 months
- Selectable logging intervals
- Sensor protection grill
- Durable non-corrosive plastic body with stainless steel handle
- Easy calibration, no need to open unit
- IP66/68 Ingress protection
- Easy to install and user-friendly operation
Applications
- Kanal und Freispiegelleitungs- Ãœberwachung auf Schwefelwasserstoff
- Kommunale und industrielle Kläranlagen
myDatasensH2S
Gasmesstechnik | Stationär
Microtronics hilft Ihnen im Kampf gegen H2S mit einem Komplettpaket aus Hardware, Software und Service. Die Messgeräte wurden an die Bedürfnisse der Kunden angepasst und sorgen dank Wartungskonzept für eine Ressourcen- und Kosteneinsparung.
Die kontinuierliche Datensammlung hilft auch dabei, Schäden frühzeitig zu erkennen, Ausfälle zu vermeiden und Prozesse zu optimieren. Die H2S-Monitoring Lösung ist zusätzlich mit einer Dosiersteuerung kombinierbar. So können entweder event-basiert, also sobald es zu einer Geruchsbildung kommt, oder präventiv Chemikalien zur Minderung der H2S-Konzentration abgegeben werden.
Characteristics
Drei Varianten verfügbar:
- Bluetooth Datenübertragung ohne ATEX Zertifizierung
- Bluetooth Datenübertragung mit ATEX Zertifizierung
- 3/4 G Variante ohne ATEX Zertifizierung
- 3/4 G Variante mit ATEX Zertifizierung
Große Sensorauswahl
- H2S:
- 0-200ppm; max. 1.000ppm
- 0-2.000ppm; max. 3.900ppm
- 0-200ppm; max. 500ppm
- 0-50ppm; max. 200ppm
- 0-50ppm; max. 220ppm
- H2O2: 0-100ppm; max. 200ppm
- NH3: 0-50ppm; max. 100ppm
Schutzart: IP 66
Betriebstemperatur: -10°C … +40°C
Relative Feuchte: 15%rH … 90%rH
Druckbereich: atmosphärisch +/- 10%
ATEX Varianten: ATEX Zone 1
Interne Temperatur: -20°C … +50°C
Interne Relative Feuchte: 0 … 100%rH
Batterieladezustand (State of Charge): 0 … 100%
BLE Signalqualität: -50dBm … -110dBm
Interne Temperatur: -20°C … +50°C
Interne Relative Feuchte: 0 … 100%rH
Batterieladezustand (State of Charge): 0 … 100%
Features
- Sensortausch direkt an der Messstelle
- Easy installation
- Alternative Gas Sensor Typen:
NH3, CO, CL2, C2H4O, H2, HCN, HCL, NO, NO2, O3, SO - Schutz der Daten durch ein umfangreiches
Sicherheitskonzept - Übertragen der Daten über 3G/UMTS
zu weltweit standardisierten Servicetarifen - Laufzeiten von bis zu 36 Monaten dank der Ultra Low Power Technologie
- Vielfältige Einstellungsmöglichkeiten
- GasBuster App
OdaTrak
Gasmesstechnik | Stationär
The OdaLog Logger has a proven track record in the wastewater industry as a tool to record, and then help control, levels of H2S gas in sewerage systems and treatment plants. The OdaTrak System provides a powerful extension, enabling the OdaLog unit to be interfaced with telemetry and control systems providing real-time gas data.
The OdaTrak System works with a specially fitted OdaLog with a fiber optic output, fiber optic cable, and the OdaTrak adapter that converts the OdaLog data to a 4/20 mA signal. This signal can be used to control odour management strategies such as chemical dosing and alarm activation. Die M20 Verschraubung des OdaTrak vereinfacht die Installation, z.B. an einem Schaltschrank. Während der Datenübertragung ist die weitere H2S-Aufzeichnung des OdaLogs möglich. Das OdaTrak Fehlersignal warnt, wenn die Datenübertragung länger unterbrochen wird.
Characteristics
- Fixed monitoring system
- Measurable gas: Hydrogen Sulfide (H2S)
- Long term recording of gas concentrations
Features
- Output signal of 4-20 mA
- For use in Zone 1 hazardous areas
- Quick and easy installation
- Fibre optic cable length: 10 to 100 metres
- During the real-time data transfer, all of the usual OdaLog functions, including continuous data logging, are available while the 4 to 20mA link is active.
Radius BZ1
Gasmesstechnik | Stationär
Get the Message Loud and Clear:When it comes to choosing equipment to protect your worksite from hazardous gases, rely on the Radiusâ„¢ BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.
Umgebungswächter mit drahtloser Alarmkette
Radius just works, no questions asked, so your teams can focus on what’s important and be confident that their area monitors are ready for whatever comes their way. Know What is Happening Without Approaching: Create wireless networks out of the box and receive real-time gas readings from other instruments, thanks to LENS Wireless and its automatic, peer-to-peer mesh network.
Characteristics
- Portable Multi-Gas Monitor
- Detect up to seven gases using 15 sensor options including PID
- Measuring ranges: Combustible gases, O2, CO, CO/H2, CO/H2S, H2, H2S, HCN, NH3, NO2, SO2 und VOC
- Standard are STEL and TWA readings
- IP66
- Certifications: ATEX, IECEx, CSA and UL
Features
- Longest running area monitor with a typical run time of 7 days (168 hours)
- Explosionsschutz – Zulassung für Ex-Zone 0
- LENSâ„¢ Wireless enables communication between area monitors and Ventisâ„¢ Pro Series personal monitors
- Optional mit Pumpe
- Customizable alarm action messages
- Powerful audible alarm 108 dB @ 1 meter
Schimmelwarner
Gasmesstechnik | Stationär
Das bionische Frühwarnsystem LifeCare warnt, bevor sich Schimmelpilze bilden. Neu daran ist: Der LifeCare Schimmelwarner berücksichtigt nicht nur biologische und bauphysikalische Gegebenheiten, sondern auch den für die Schimmelentstehung relevanten Faktor Zeit.
Schimmel bildet sich erst, wenn über Tage lang eine hohe Luftfeuchte herrscht. Genau das meldet der LifeCare Schimmelwarner, indem er abgestufte akustische und optische Warnungen abgibt. Das Gerät informiert über den optimalen Lüftungsrhythmus und empfiehlt geeignetes Heizen. So wird der gesundheitsschädigenden „schwarzen Gefahr“ effektiv entgegengewirkt.
Endlich die effiziente Schimmel-Vermeidung
-
- Schützt die Gesundheit
- Vermeidet unnötige Mietstreitigkeiten
-
- Speichert optional Alarmmeldungen / Messungen
- Senkt die Heizkosten
- Einfachste Bedienung
- Klar verständliches Ablesen der Werte
Deutsches Patent Nr. 10 2004 036 578
Europäisches Patent Nr. 1621901
Titan
Gasmesstechnik | Stationär
TITAN is fixed, continuous, real-time benzene specific monitor designed for petrochemical environments, providing the ultimate device for plant and workforce. Fast and accurate detection of benzene down to 0.1 ppm.
TITAN can be used to detect gases across a wide range of industries and applications. TITAN provides an immediate warning alarm system with two operator configurable levels, ensuring workers are kept safe and protected to the standards required on site. TITAN’s continuous, real-time measurement allows trends over time to be monitored and communicated via 4-20 mA or RS485. Data is stored internally and can be downloaded remotely for analysis.
Characteristics
- Fixed benzene specific monitor
- Dynamic range 0,1 … 20 ppm
- PID, 10.6 eV lamp coupled with selective filtering
- Continuous, real-time detection
- Datalogger
- Communication: 4-20 mA, RS 485 and USB
- Protection: IP 65
- Approvals: ATEX, IECEx (CSA approval pending)
Features
- Two relay outputs provide an immediate warning alarm
- Two user-definable independent alarm levels including optional real-time STEL calculation
- Internally regulated heating for stable operation at extreme temperatures
- Modular design for ease of installation and servicing
Applications
- Petrochemical
- Offshore
- Oil & Gas
- Filling Station Monitoring / Leakages